• home icon
  • arrow icon Products
  • arrow iconTransmitter - VHF / UHF, 4W / 5W (12-62-0000)

Transmitter - VHF / UHF, 4W / 5W

12-62-0000

The 12-62 series of transmitters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts.

Software can be used to tune across its full frequency range with no hardware adjustments. Other user changeable parameters include baud rate, CapCodes and messaging.

Available protocols includes: 
Salcom, TAP (PET), Acope, Comp1, Comp2, TNPP, ESPA4.4.4, Ascom, Austco, Match, Gent, SMS, Gaming, GPS & Pulse Count.

 

The 12-62 Series transmitters are available as VHF and UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts. Using programming software, each model can be tuned across its full frequency range with no hardware adjustments.

They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.

In addition to a direct/RS232 buffered serial port, an on-board USB port enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.

The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, Paging Entry Protocol (PET) or Telocator Alphanumeric Protocol (TAP) PG1 protocol. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB port.

Four discrete inputs are supported which may be used to initiate relay commands for remote control applications.

For paging applications a different pre-programmed message can be assigned to an input on high and/or low transition. The unit also supports low voltage detection on the power input.

Configuration of the transmitter is performed via the USB port or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.

The 12-62 is housed in an attractive, durable extruded aluminium case with provision on the base plate for wall mounting.

  • Supports NRZ and POCSAG Transmissions
  • High VSWR tolerance
  • Transmit duty cycle 50; maximum 5 minutes on time
  • Direct/RS232 buffered serial port
  • USB port
  • Four discrete inputs
  • POCSAG encoder (programmable on/off)
  • RF output through standard BNC termination
  • Protocols: Salcom, TAP/PET, TNPP, ESPA.4.4.4, Sscom, Gaming, Austco, Match, Gent, GPS & Pulse Count, SMS, Scope, Comp1, Comp2, 12-32, 12-36, 12-84.
  • 240 Character messaging
  • Buffered messages
  • Input timing control(watchdog)
  • Programmable de-bounce control
  • NZS/AS4769, ETS 300 224 (EC), FCC Pt 90.203 approvals
  • Rugged extruded aluminium case.
Specifications
Model 12-62-0000 VHF/UHF Transmitter
Frequency Range VHF 148 - 164 MHz - VHF (Model No. 12-62-00150)
Frequency Range UHF 427.5 - 475 MHz UHF (Model No. 12-62-0450)
Frequency Selection User Configurable
Power Supply +13.8V typical (11 to 15 VDC range)
Power Consumption Low Power Mode: 17.5mA
Standby: 40mA
Transmit: 1.2A @ 4W
Transmit Power 4W, 2W, 1W, 500mW, 250mW, 100mW, 50mW (5W on request)
Channel Spacing 5kHz, 6.25kHz, 10kHz, 12.5kHz, 25kHz
Modulation FSK with NRZ data
Deviation ±2.25kHz or ±4.5kHz
Transmit Duty Cycle 50%; Maximum 5 minutes on time
Baud Rates 512, 1200
Message Format POCSAG
Configuration Application 12-62 Configuration Tool
Downloadable for free from Downloads page
Programming Cable Mini USB
12-45-0000 (RJ12 to DB9)
Can be used with a USB to RS232 DB9 Serial Adapter Cable
Serial Port 9600 , N, 8, 1; RS232 / USB
Other serial protocols available on request
Serial Protocols Salcom; TAP (PET); TNPP; ESPA 4.4.4; Ascom; Gaming; Austco; Match; Gent; GPS &
Pulse Count; SMS; 11-10/12-32; 12-36; 12-84, Scope, Comp1, Comp2.
Discrete Inputs 4 (Ground activated)
Other I/O PTT In; PTT Out (50mA max); External Modula4on (0 - 5V ±1V)
Connectors Serial Port (RS232) = RJ12 (6P6C)
Input / Outputs = RJ45 (8C)
Programming = mini USB
Power Connector 2-way plug & socket, screw connections (supplied)
Environmental Protection Not suitable for outdoor use and should be protected from adverse environmental conditions
Operating Temperature -20ºC to +50ºC (-4ºF to +122ºF)
Indicators Power LED (Green)
- Slow Flashing = Normal Operation
- Rapid Flashing = Low Supply Voltage
Status LED (Red)
- On = Transmitting
- Flashing = Error Condition
Weight 316g
Enclosure Dimensions 100mm x 130mm x 30mm (WxDxH)
Enclosure Material Extruded aluminium
Colour Matt black
Type Approvals AS/NZS 4769.1:2000 + Amendment 1:2002 (RF)
EN 300-224-2 (RF)
FCC CFR47 Part 90 (RF) - UHF only (Model No. 12-62-0450)
EN 301 489-2 V2.1.0 (EMC)
EN 60950-1:2006 (Safety)
12-62-0000 Product Brochure
  • Model: 12-62-0000
    12-62 Series
12-62-0000 Product Manual
  • Model:
    12-62 Series
12-62 Configuration Tool v1019 for v2.9960 - Pre 22/05/2018
  • Model:
    12-62 Series
  • Description:
    This version is for all units supplied before May 22 2018. If your unit was supplied after this date, download the configuration tool below
  • Supported:
    Microsoft Windows
12-62 Configuration Tool v2114 for v3.05 - Post 22/05/2018
  • Model:
    12-62 Series
  • Description:
    This version is for all units supplied after May 22 2018. If your unit was supplied before this date, download the configuration tool above.
  • Supported:
    Microsoft Windows
  • Information

    The 12-62 Series transmitters are available as VHF and UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts. Using programming software, each model can be tuned across its full frequency range with no hardware adjustments.

    They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.

    In addition to a direct/RS232 buffered serial port, an on-board USB port enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.

    The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, Paging Entry Protocol (PET) or Telocator Alphanumeric Protocol (TAP) PG1 protocol. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB port.

    Four discrete inputs are supported which may be used to initiate relay commands for remote control applications.

    For paging applications a different pre-programmed message can be assigned to an input on high and/or low transition. The unit also supports low voltage detection on the power input.

    Configuration of the transmitter is performed via the USB port or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.

    The 12-62 is housed in an attractive, durable extruded aluminium case with provision on the base plate for wall mounting.

  • Details
    • Supports NRZ and POCSAG Transmissions
    • High VSWR tolerance
    • Transmit duty cycle 50; maximum 5 minutes on time
    • Direct/RS232 buffered serial port
    • USB port
    • Four discrete inputs
    • POCSAG encoder (programmable on/off)
    • RF output through standard BNC termination
    • Protocols: Salcom, TAP/PET, TNPP, ESPA.4.4.4, Sscom, Gaming, Austco, Match, Gent, GPS & Pulse Count, SMS, Scope, Comp1, Comp2, 12-32, 12-36, 12-84.
    • 240 Character messaging
    • Buffered messages
    • Input timing control(watchdog)
    • Programmable de-bounce control
    • NZS/AS4769, ETS 300 224 (EC), FCC Pt 90.203 approvals
    • Rugged extruded aluminium case.
  • Specifications
    Specifications
    Model 12-62-0000 VHF/UHF Transmitter
    Frequency Range VHF 148 - 164 MHz - VHF (Model No. 12-62-00150)
    Frequency Range UHF 427.5 - 475 MHz UHF (Model No. 12-62-0450)
    Frequency Selection User Configurable
    Power Supply +13.8V typical (11 to 15 VDC range)
    Power Consumption Low Power Mode: 17.5mA
    Standby: 40mA
    Transmit: 1.2A @ 4W
    Transmit Power 4W, 2W, 1W, 500mW, 250mW, 100mW, 50mW (5W on request)
    Channel Spacing 5kHz, 6.25kHz, 10kHz, 12.5kHz, 25kHz
    Modulation FSK with NRZ data
    Deviation ±2.25kHz or ±4.5kHz
    Transmit Duty Cycle 50%; Maximum 5 minutes on time
    Baud Rates 512, 1200
    Message Format POCSAG
    Configuration Application 12-62 Configuration Tool
    Downloadable for free from Downloads page
    Programming Cable Mini USB
    12-45-0000 (RJ12 to DB9)
    Can be used with a USB to RS232 DB9 Serial Adapter Cable
    Serial Port 9600 , N, 8, 1; RS232 / USB
    Other serial protocols available on request
    Serial Protocols Salcom; TAP (PET); TNPP; ESPA 4.4.4; Ascom; Gaming; Austco; Match; Gent; GPS &
    Pulse Count; SMS; 11-10/12-32; 12-36; 12-84, Scope, Comp1, Comp2.
    Discrete Inputs 4 (Ground activated)
    Other I/O PTT In; PTT Out (50mA max); External Modula4on (0 - 5V ±1V)
    Connectors Serial Port (RS232) = RJ12 (6P6C)
    Input / Outputs = RJ45 (8C)
    Programming = mini USB
    Power Connector 2-way plug & socket, screw connections (supplied)
    Environmental Protection Not suitable for outdoor use and should be protected from adverse environmental conditions
    Operating Temperature -20ºC to +50ºC (-4ºF to +122ºF)
    Indicators Power LED (Green)
    - Slow Flashing = Normal Operation
    - Rapid Flashing = Low Supply Voltage
    Status LED (Red)
    - On = Transmitting
    - Flashing = Error Condition
    Weight 316g
    Enclosure Dimensions 100mm x 130mm x 30mm (WxDxH)
    Enclosure Material Extruded aluminium
    Colour Matt black
    Type Approvals AS/NZS 4769.1:2000 + Amendment 1:2002 (RF)
    EN 300-224-2 (RF)
    FCC CFR47 Part 90 (RF) - UHF only (Model No. 12-62-0450)
    EN 301 489-2 V2.1.0 (EMC)
    EN 60950-1:2006 (Safety)
  • Manuals & Downloads
    12-62-0000 Product Brochure
    • Model: 12-62-0000
      12-62 Series
    12-62-0000 Product Manual
    • Model:
      12-62 Series
    12-62 Configuration Tool v1019 for v2.9960 - Pre 22/05/2018
    • Model:
      12-62 Series
    • Description:
      This version is for all units supplied before May 22 2018. If your unit was supplied after this date, download the configuration tool below
    • Supported:
      Microsoft Windows
    12-62 Configuration Tool v2114 for v3.05 - Post 22/05/2018
    • Model:
      12-62 Series
    • Description:
      This version is for all units supplied after May 22 2018. If your unit was supplied before this date, download the configuration tool above.
    • Supported:
      Microsoft Windows

Does your project needs a reliable wireless component?

Not sure how your project can benefit from our systems? Get in touch to
discuss your requirements with our wireless engineers.